First, the purpose of cleaning and maintenance
1. Improve the appearance: timely remove the dirt generated in daily use, so that the Vinyl flooring fully show its extraordinary appearance and natural gloss.
2. Protect the floor: prevent the Vinyl flooring from accidental chemicals, cigarette butts, shoe prints, oil and water erosion, reduce the mechanical wear of the surface to a minimum, so that the durability of the floor itself can be fully played, thus extending the service life of the floor.
3 convenient care: due to the close surface structure and special treatment of the Vinyl flooring itself, pay attention to daily cleaning and maintenance, can make the floor easier and care, extend the service life.
Two, nursing attention
1. All kinds of dirt on the ground should be removed in time.
2. It is absolutely prohibited to soak the floor in open water. Although some ground uses waterproof glue to cut off the water source (such as floor drain, water room, etc.), it will seriously affect the service life of the floor if it is soaked in water for a long time. In the process of cleaning, use the suction machine to suck up the sewage in time.
3. For places with more people and greater wear, the maintenance cycle should be shortened and the number of waxing passes of high strength surface wax should be increased.
4. It is absolutely prohibited to use hard and rough cleaning utensils (such as steel wire balls, cleaning cloth, etc.) to prevent sharp objects from colliding with the Vinyl flooring.
5. It is highly recommended to place footpads at the entrance of public places with high traffic to prevent the floor from being stained and scratched by dirt sand particles.
Three, different stages of maintenance methods:
(I) Clean and maintain the floor after laying/before use
1. Remove dust and debris from the floor surface.
2. Clean the floor with 3M red grinding sheet or similar products at a low speed (dilute it with a strong universal cleaner 1:20 with water and then add it to the floor wiping machine), remove the protective wax, grease, dust and other dirt on the floor surface, and drain the sewage with an absorbent machine.
3. Wash and blot with clean water.
4. Apply 1-2 layers of strong wax as needed.
Cleaner: Strong all-purpose cleaner high strength face wax
Tool: ground grinding machine red grinding machine suction machine wax drag press
(2) Daily cleaning and maintenance
1. Push dust or vacuum. (Drag the dust pulling agent on the ground, dry it, and then push the dust.)
2. Wet drag. (Dilute the floor polish with 1:20 water and mop the floor with a semi-wet mop.) If necessary, you can also use a low speed cleaning machine with wash & shine.
Cleaning agent: floor dragging agent floor cleaning and polishing agent
Tool: Dust push mop
(3) Regular cleaning and maintenance
1. Push dust or vacuum.
2. The floor cleaning and polishing agent shall be diluted with water at 1:20, and then mopping the floor or grinding with high-speed polishing machine and red grinding plate.
3. Apply 1-2 layers of strong facial wax.
4. According to the need, can cooperate with high speed polishing machine and white polishing pad polishing treatment.
Cleaner: Floor cleaning polish high strength face wax
Tool: dust grinding machine red, white grinding machine water absorption machine wax drag press
(4) Complete renovation treatment
1. Push dust or vacuum.
2. Apply evenly on the ground after 1∶10 dilution with strong wax removal water, wait 5-10 minutes, clean and remove wax with a red grinding machine at a low speed. Use a suction machine to suck up the sewage in time.
3. Wash with clean water and blot dry until no residual cleaning agent is left on the floor.
4. Apply 1-2 layers of strong wax as needed.
Cleaner: Floor cleaning polish high strength face wax
Tool: dust grinding machine red, white grinding machine water absorption machine wax drag press
(5) Special dirt treatment
1. Oil pollution: local oil pollution, the water-based oil removal agent stock solution directly on the towel to wipe; Large area of oil, will be waterborne oil removal agent diluted at 1:10, with a wiping machine and red grinding plate at low speed clean.
2. Black offset printing: Use spray maintenance wax with high-speed polishing machine and white polishing pad polishing treatment. For a long time of black offset printing, you can pour strong black offset printing remover directly on the towel to wipe treatment.
3. Glue or gum: Pour on the towel directly with professional strong adhesive remover wipe.
Cleaner: Water-based oil remover spray cleaning and maintenance wax strong black offset printing remover strong glue remover.
